Simplicity S60/ Riccar R60 HEPA Media and Secondary Filter Set
Genuine HEPA Media and Secondary Filter replacement set for Simplicity Model, S60. This set gives you all filters needed for your S60. We recommend replacing your filters every 6-12 months. Every 6 months for high use machines, every 12 months for lower use machines. These filters are NOT washable or reusable.
For Simplicity Models: S60. For Riccar Models: R60. For Fuller Brush Models: Spiffy Maid FB-SPFM.2
Genuine Simplicity Part: RF60
Filters should be changed every 6-12 months. If you are an asthma or allergy suffer, or clean very frequently, you will change your filters every 6 months. For infrequent cleaners, you will change your filters every 12 months.
Please Note: These filters are not washable or reusable.
Replacing the Foam Filters:
Pre-Motor Filter:
1. Remove the entire dust bin from the vacuum
2. remove the gray foam filter from the frame located at the base of the main body.
3. Shake or tap the filter to remove excess dust or replace with a new filter
Dust Bin Filter:
1. Remove the white filter by grasping the top of the filter and pulling straight.
2. Shake or tap the filter to remove excess dust or replace with a new filter.
Pre-Filter
1. Remove the cyclonic filter holder.
2. Remove the shite filter by grasping the top of the filter and pulling straight up.
3. Remove the black pre-filter from the inside of the cyclonic filter holder.
4. Shake or tap the filter to remove excess dust or replace with a new filter.
5. Replace the pre-filter and the white filter in the cyclonic filter holder.
6. Replace the dust cup onto the vacuum.
HEPA Media Filter:
1. remove the filter cover by pushing in on the tab and rotating the cover out.
2. Remove the filter by grasping the filter and pulling straight out of the machine.
3. Replace with a new filter.
4. Replace the filter cover by inserting the two tabs in first, then snapping the cover in place with the large tab.
Staff Top Picks
